Create Raspberry Pi CM4 PCB
Budget: €30 – €250 EUR
I would like to have a PCB created, which facilitates the use of a Raspberry Pi CM4 module.
On this PCB there should be:
1- Naturally, the connectors (DF40HC(3.0)-100DS-0.4v)
2- 2.5mm DC jack female for 24v input
3- DC/DC converting 24v to 5v that will supply power to the CM4 module
4- RJ45 Ethernet jack
5- Pins for all the available GPIO pins (properly labeled)
Finished files need to be provided in Eagle CAD.
On this PCB there should be:
1- Naturally, the connectors (DF40HC(3.0)-100DS-0.4v)
2- 2.5mm DC jack female for 24v input
3- DC/DC converting 24v to 5v that will supply power to the CM4 module
4- RJ45 Ethernet jack
5- Pins for all the available GPIO pins (properly labeled)
Finished files need to be provided in Eagle CAD.