Lens adapter / optical engineering & design required
Budget: €30 – €250 EUR
I need optical adapter which will fit on the back of the lens to transmit / relay the image on the image sensor without loss of sharpness, quality or light. The adapter needs possible compilation of optics but the diameter must be 14 mm including the casing.
Currently, the lens needs to travel very close to the sensor for it to be in focus, giving only aprox 50 mm distance focus... Getting it flat face to face would definitely give more focal range. The restriction is that the barrel is slightly too thick to getting so close / face to face to camera sensors below APS-H. Ideally, would like to use the lens with APS-C, CMOS and MFT sensors.
Please let me know if you can assist.
Currently, the lens needs to travel very close to the sensor for it to be in focus, giving only aprox 50 mm distance focus... Getting it flat face to face would definitely give more focal range. The restriction is that the barrel is slightly too thick to getting so close / face to face to camera sensors below APS-H. Ideally, would like to use the lens with APS-C, CMOS and MFT sensors.
Please let me know if you can assist.