On-Site Cisco 9300 Installation Help
Budget: $60 – $70 USD
I have a brand-new Cisco Catalyst 9300 already delivered to the data room and I need an experienced field engineer on site to see the job through from powered-off hardware to a fully verified switch in production.
Here is what I expect you to handle:
• Pre-installation readiness: confirm power requirements, prepare the rack rails, and run or tidy the necessary copper and fibre cabling so the switch can slot straight in.
• Physical installation: safely rack-mount the 9300, connect power, management, and uplinks, and apply proper cable management.
• Initial configuration: bring the switch online with a clean, best-practice base config that I can build on later.
The FE will need to provide console access to GTT remote engineer, please note that Cisco 9300 is with USB-A to USB-mini-B console cable, please have the FE prepared with such cable.
Remote engineer will assist, the call info will be shared accordingly
Here is what I expect you to handle:
• Pre-installation readiness: confirm power requirements, prepare the rack rails, and run or tidy the necessary copper and fibre cabling so the switch can slot straight in.
• Physical installation: safely rack-mount the 9300, connect power, management, and uplinks, and apply proper cable management.
• Initial configuration: bring the switch online with a clean, best-practice base config that I can build on later.
The FE will need to provide console access to GTT remote engineer, please note that Cisco 9300 is with USB-A to USB-mini-B console cable, please have the FE prepared with such cable.
Remote engineer will assist, the call info will be shared accordingly