mikrotik setup. load balance and two dhcp local servers
Budget: €8 – €30 EUR
Hello i have the hex rb750gr3 and i would like you to do he following setup
it will run in router mode after the dsl modem router
ETH1: connected internet gateway from dsl router modem (192.168.2.1 is the modem and ..192.168.2.20 to be the mikrotik)
ETH2: connected second future dsl router modem FOR LOAD BALANCING (to have extra speed) 192.168.3.1 to be the future modem
ETH3: dhcp server with pool range 192.168.88.1-192.168.88.254
ETH4: dhcp server with pool range 192.168.1.2-192.168.1.254 (192.168.1.1 for the mikrotik)
ETH5: in bridge with eth4
----------
i will use the eth3 for my clients and the eth4&5 for my private devices. Concerning the clients(eth3) i want to be able to see all together in one screen, how much time they have been active and their total traffic without using the hotspot feature (server) with which we had problems in clients connections in other mikrotiks.
you will have to write me the necessary commands to type in winbox terminal in order to program it thank you
it will run in router mode after the dsl modem router
ETH1: connected internet gateway from dsl router modem (192.168.2.1 is the modem and ..192.168.2.20 to be the mikrotik)
ETH2: connected second future dsl router modem FOR LOAD BALANCING (to have extra speed) 192.168.3.1 to be the future modem
ETH3: dhcp server with pool range 192.168.88.1-192.168.88.254
ETH4: dhcp server with pool range 192.168.1.2-192.168.1.254 (192.168.1.1 for the mikrotik)
ETH5: in bridge with eth4
----------
i will use the eth3 for my clients and the eth4&5 for my private devices. Concerning the clients(eth3) i want to be able to see all together in one screen, how much time they have been active and their total traffic without using the hotspot feature (server) with which we had problems in clients connections in other mikrotiks.
you will have to write me the necessary commands to type in winbox terminal in order to program it thank you