Setup 2 VLANs on a MikroTik RouterBoard - Small task, expected time: 30 minutes

We have a small router: MikroTik RouterBoard.

We need to have that setup with 2 VLANs.

Switch Port 1: WAN
Switch Port 2: VLAN 1 (Name: Internet Zone)
Switch Port 3: VLAN 1 (Name: Internet Zone)
Switch Port 4: VLAN 1 (Name: Internet Zone)
Switch Port 5: VLAN 2 (Name: Zecure Zone)

VLAN 1 (Internet Zone):
- Must have DHCP server. Subnett 192.168.50.*
- All ports on both TCP/UDP open to WAN
- No access to/from VLAN 2

VLAN 2 (Secure Zone):
- Must have DHCP server. Subnett 192.168.51.*
- Only TCP/UDP port 59595 open to WAN
- No access to/from VLAN 1

See attached images to see a schematic.

The purpose of the project is that we can have one switch-port (port 5 on the MikroTik) that is completely isolated from the Internet, except it is open on port 59595.

We will give you access to a laptop that has Wifi connection to internet and at the same time have a cable in any of the ports on the MikroTik. The laptop have all network tools needed installed.

Payment will be completed when we have verified that it is working as specified.

We excpect this to take maximum 30 minutes. We will pay up to 40 USD.

If you do this task properly, without questions, you can get more assignemts from us.