Nordic 9151 NB-IoT MQTT Test
Budget: ₹1,500 – ₹12,500 INR
I’m ready to put my Nordic nRF9151 development kit through its paces. The board is already fitted with basic temperature and humidity sensors; what I need now is a clean, NB-IoT-powered data push to a Mosquitto broker with no extra processing—just raw readings published at a sensible interval.
All interaction will take place remotely. You can guide me live, or supply clear, repeatable instructions and firmware so I can flash and verify on my end.
Key points you’ll handle:
• Configure the NB-IoT link on the nRF9151 DK.
• Create or adapt lightweight firmware (Nordic SDK or Zephyr—your call) that reads the onboard sensors and publishes to my Mosquitto topic.
• Provide concise steps for any required modem/SIM setup and broker credentials.
• Demonstrate successful end-to-end transmission via a short live session or recorded log.
Acceptance criteria:
1. Temperature and humidity values appear in my Mosquitto topic in real time.
2. Connection survives network drops by auto-reconnecting.
3. All source code and configuration files are delivered with brief comments.
If this sounds straightforward for you, let’s get it running.
All interaction will take place remotely. You can guide me live, or supply clear, repeatable instructions and firmware so I can flash and verify on my end.
Key points you’ll handle:
• Configure the NB-IoT link on the nRF9151 DK.
• Create or adapt lightweight firmware (Nordic SDK or Zephyr—your call) that reads the onboard sensors and publishes to my Mosquitto topic.
• Provide concise steps for any required modem/SIM setup and broker credentials.
• Demonstrate successful end-to-end transmission via a short live session or recorded log.
Acceptance criteria:
1. Temperature and humidity values appear in my Mosquitto topic in real time.
2. Connection survives network drops by auto-reconnecting.
3. All source code and configuration files are delivered with brief comments.
If this sounds straightforward for you, let’s get it running.