Kinco PLC IoT Programming

The project revolves around a Kinco PLC linked to its HMI, all developed in the D-Tool suite. I need the controller to handle three core jobs simultaneously: log key process data to non-volatile memory or an external database, push that data to a remote dashboard for live monitoring over TCP/IP, and execute closed-loop automated control of the machine.

Connectivity is critical. The program must speak standard TCP/IP for the plant network and support both CANopen and raw CANbus frames so it can exchange data with existing field devices and a supervisory gateway.

On the I/O side, the PLC will gather readings from temperature, pressure and proximity sensors, plus capture motor-RPM feedback for speed regulation. The logic should scale, so clean tag structures, well-commented code and clear HMI naming are important to me.

Deliverables
• Complete Kinco PLC project file (.plc) with fully commented ladder/SFC logic
• D-Tool HMI project with trend graphs, alarm pages and remote-monitor readouts
• Configuration notes for TCP/IP, CANopen and CANbus mapping
• A short commissioning guide detailing wiring, sensor calibration steps and test procedures
• Proof-of-function video or live session showing data logging, dashboard refresh and automatic control in action

I will load the code on site, so please keep the program version compatible with the latest public release of Kinco D-Tool. Let me know if any additional libraries or licenses are required before we start.