6 motors controller
Budget: $250 – $750 USD
It should receive data throw UDP interface and send step and direction to 6 motor (SERVO DRIVER)
The controller should have acceleration and deceleration on the fly (the calculation should be processed each new data).
The minimum step speed 50000 steps/s for each motor
UDP data example ">12345,12345,12345,12345,12345,12345<
The minimum UDP data rate is 500 data per second (per motor)
A Windows GUI to monitor and configure. (limits, acceleration, max speed)
I need the hardware and the software.
The controller should have at least 6 inputs for control.(UP, DOWN, HOLD, ..)
Use of a regular components.
The controller should have acceleration and deceleration on the fly (the calculation should be processed each new data).
The minimum step speed 50000 steps/s for each motor
UDP data example ">12345,12345,12345,12345,12345,12345<
The minimum UDP data rate is 500 data per second (per motor)
A Windows GUI to monitor and configure. (limits, acceleration, max speed)
I need the hardware and the software.
The controller should have at least 6 inputs for control.(UP, DOWN, HOLD, ..)
Use of a regular components.