PLC communication
Budget: €750 – €1,500 EUR
I buyed a machine with PLC controller and a XINJE TG765S-XT Touchwin panel without rj port (just rs232). I need to integrate the information flows of the machine into my company ERP. I want to send commands to machine (start, configuration ...) and receive a log (number of pieces produced, operating time between one start and another).
The project:
1) replace the panel with another one equipped with an rj45 or connect a ethernet gateway to rs232 port
2) Modify the software on board to communicate via ethernet with the PLCs using a standard protocol (modsbus tcp, OPC UA, MQTT ...) by sending configurations to the machine and receiving the logs
The project:
1) replace the panel with another one equipped with an rj45 or connect a ethernet gateway to rs232 port
2) Modify the software on board to communicate via ethernet with the PLCs using a standard protocol (modsbus tcp, OPC UA, MQTT ...) by sending configurations to the machine and receiving the logs