OTA application using Wi-Fi and merge existing programme
Budget: $30 – $250 CAD
The project consist to build OTA firmware on MPLab to work on my own board based on WIFI32E01 chip.
The application must try to connect with the defined server address and download the new image. The downloaded image must be stored in the external flash (Winbond W25Q16JVZPIQ) initially. Application must reset the device to run new image once image is successfully downloaded from server. When device is reset ,bootloader must try to program the image from the external flash and if programming is successful ,downloaded image from the server must be executed .
This code must be merge with MPLab code already code in the GCB board.
The application must try to connect with the defined server address and download the new image. The downloaded image must be stored in the external flash (Winbond W25Q16JVZPIQ) initially. Application must reset the device to run new image once image is successfully downloaded from server. When device is reset ,bootloader must try to program the image from the external flash and if programming is successful ,downloaded image from the server must be executed .
This code must be merge with MPLab code already code in the GCB board.