ST8500 Firmware for PLC & UART
Budget: $30 – $250 USD
I need a professional firmware developer who can create firmware for an ST8500 chip that communicates over Power Line Communication (PLC). The ST8500 will be interfacing with an ESP32-S3 MCU using UART.
The primary objective of this firmware is to facilitate file transfer for initial boot. Therefore, the firmware should be capable of managing the transfer of PE and RTE image files, along with intercommunication with ESP32 for MQTT over IPV6
The ideal freelancer for this project should have:
- Extensive experience in firmware development, particularly for ST8500 chips.
- In-depth understanding of PLC communication and UART interfacing.
- Proficiency in managing file transfers within firmware.
- Capability to support specific file formats, namely PE and RTE images.
- Familiarity with working with ESP32-S3 MCUs.
Please provide examples of relevant previous work in your bid.
The primary objective of this firmware is to facilitate file transfer for initial boot. Therefore, the firmware should be capable of managing the transfer of PE and RTE image files, along with intercommunication with ESP32 for MQTT over IPV6
The ideal freelancer for this project should have:
- Extensive experience in firmware development, particularly for ST8500 chips.
- In-depth understanding of PLC communication and UART interfacing.
- Proficiency in managing file transfers within firmware.
- Capability to support specific file formats, namely PE and RTE images.
- Familiarity with working with ESP32-S3 MCUs.
Please provide examples of relevant previous work in your bid.