ATSAM4S uart upgrade (SAM-BA)
Budget: $30 – $250 USD
TARGET CPU: ATSAM4S4B-AU A
The purpose is to upgrade the target CPU using the SAM-BA protocol.
You create a PC (Window) GUI and provide the source.
The GUI is for confirming the completion of the work.
I plan to reprogram using that source.
You must have an ATSAM4S4B-AU or a board similar to the ATSAM4S.
I do not provide H/W.
Reference:
https://microchipsupport.force.com/s/article/SAM-BA-2-18-Programming-Steps-for-SAM-E-S-V-3x-4x-products
https://ww1.microchip.com/downloads/en/DeviceDoc/SAM_4S_Series_Family_Errata_DS80000771C.pdf
https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/Atmel-11100-32-bitCortex-M4-Microcontroller-SAM4S_Datasheet.pdf
Note) Only C must be used.
You must not use C++.
The purpose is to upgrade the target CPU using the SAM-BA protocol.
You create a PC (Window) GUI and provide the source.
The GUI is for confirming the completion of the work.
I plan to reprogram using that source.
You must have an ATSAM4S4B-AU or a board similar to the ATSAM4S.
I do not provide H/W.
Reference:
https://microchipsupport.force.com/s/article/SAM-BA-2-18-Programming-Steps-for-SAM-E-S-V-3x-4x-products
https://ww1.microchip.com/downloads/en/DeviceDoc/SAM_4S_Series_Family_Errata_DS80000771C.pdf
https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/Atmel-11100-32-bitCortex-M4-Microcontroller-SAM4S_Datasheet.pdf
Note) Only C must be used.
You must not use C++.