MATLAB-Simulink Electrical Power Mitigation Project
Budget: $10 – $30 USD
I need help with a MATLAB/Simulink electrical power system project related to voltage sag mitigation in a distribution network using UPFC.
The main objective is to simulate voltage sag caused by the connection of an additional load and then mitigate this sag using a UPFC-based compensation technique. I already have a reference paper and an existing Simulink model, but the current UPFC/CHB section is not properly restoring the load voltage, so the model may need correction in a simplified but technically valid UPFC structure.
Required work includes:
* find the error in existing MATLAB/Simulink model for voltage sag mitigation using UPFC and correct it
* Show results without UPFC:
* Load voltage waveform
* Active power waveform
* Reactive power waveform
* Voltage sag effect due to additional load
* Show results with UPFC:
* Load voltage waveform after compensation
* Active power stabilization waveform
* Reactive power stabilization waveform
* Voltage maintained close to nominal value
* Show UPFC injected voltage waveform
* Compare results with and without UPFC
* Provide a short written explanation of:
* Circuit model
* Working of UPFC
* Voltage sag mitigation process
* Injected voltage role
* Comparison of compensated and uncompensated cases
The final deliverables should include the corrected/rebuilt Simulink model, required waveform screenshots, injected voltage result, and a concise explanation document. the work is not much the model already complete and built you just need to identify what i am missing which causes this error
Please only apply if you have experience with MATLAB/Simulink, Simscape Electrical / Specialized Power Systems, power quality, voltage sag mitigation, and FACTS devices such as UPFC.
The main objective is to simulate voltage sag caused by the connection of an additional load and then mitigate this sag using a UPFC-based compensation technique. I already have a reference paper and an existing Simulink model, but the current UPFC/CHB section is not properly restoring the load voltage, so the model may need correction in a simplified but technically valid UPFC structure.
Required work includes:
* find the error in existing MATLAB/Simulink model for voltage sag mitigation using UPFC and correct it
* Show results without UPFC:
* Load voltage waveform
* Active power waveform
* Reactive power waveform
* Voltage sag effect due to additional load
* Show results with UPFC:
* Load voltage waveform after compensation
* Active power stabilization waveform
* Reactive power stabilization waveform
* Voltage maintained close to nominal value
* Show UPFC injected voltage waveform
* Compare results with and without UPFC
* Provide a short written explanation of:
* Circuit model
* Working of UPFC
* Voltage sag mitigation process
* Injected voltage role
* Comparison of compensated and uncompensated cases
The final deliverables should include the corrected/rebuilt Simulink model, required waveform screenshots, injected voltage result, and a concise explanation document. the work is not much the model already complete and built you just need to identify what i am missing which causes this error
Please only apply if you have experience with MATLAB/Simulink, Simscape Electrical / Specialized Power Systems, power quality, voltage sag mitigation, and FACTS devices such as UPFC.