Design and simulate the scheme given in Figure 1 using MATLAB Simulink® in accordance with the following specifications.
Budget: $10 – $30 USD
The total power generated from the PV array should be 91kW.
The single-phase inverter should be implemented using IGBTs and switched
via Bipolar or Unipolar PWM.
The interconnecting filter should be a simple inductor with a series parasitic
resistor.
Second Order Generalized Integrator (SOGI) PLL must be utilized to perform
grid synchronization.
You may design and implement a MPPT algorithm of your choice.
The single-phase inverter should be implemented using IGBTs and switched
via Bipolar or Unipolar PWM.
The interconnecting filter should be a simple inductor with a series parasitic
resistor.
Second Order Generalized Integrator (SOGI) PLL must be utilized to perform
grid synchronization.
You may design and implement a MPPT algorithm of your choice.