Custom Branded Microphones
Budget: £20 – £250 GBP
I would like to prototype this merchandise
3. Circular Outer Ring
Add a circular ring behind the microphone.
Ring should look like a bent wire but be a 3 mm solid circular frame.
The microphone sits centered inside this ring.
The microphone form should be recreated as a 3D outline with a uniform thickness to give a wire-frame effect.
No physical wire required — the outline is simply a solid 3D track following the path of a continuous wire
Thickness & Dimensions
Outline/frame thickness: 3 mm (solid).
Outline height (top of microphone to bottom): approx. 120–130 mm within a total sculpture height of 150 mm including base connection.
Support Stem
A straight, simple solid rod (3–4 mm diameter) connects the logo outline to the base.
This should be vertical and centrally aligned.
. Base
A separate rectangular base block:
Dimensions
100 mm (L) × 50 mm (W) × 30 mm (H)
Solid block.
Engraving
Front:
Logo
And next to it the name
Björn Ludwig
3. Circular Outer Ring
Add a circular ring behind the microphone.
Ring should look like a bent wire but be a 3 mm solid circular frame.
The microphone sits centered inside this ring.
The microphone form should be recreated as a 3D outline with a uniform thickness to give a wire-frame effect.
No physical wire required — the outline is simply a solid 3D track following the path of a continuous wire
Thickness & Dimensions
Outline/frame thickness: 3 mm (solid).
Outline height (top of microphone to bottom): approx. 120–130 mm within a total sculpture height of 150 mm including base connection.
Support Stem
A straight, simple solid rod (3–4 mm diameter) connects the logo outline to the base.
This should be vertical and centrally aligned.
. Base
A separate rectangular base block:
Dimensions
100 mm (L) × 50 mm (W) × 30 mm (H)
Solid block.
Engraving
Front:
Logo
And next to it the name
Björn Ludwig