NAT rule for one server connected to internal Mikrotik RB941
Budget: £10 – £20 GBP
The internal router (Mikrotik RB941), bridges 2 networks.
(1) A DMZ within the 10.0.0.0/24 network containing one server which has the address 10.0.0.200. The server thinks its default GW is 10.0.0.1, but this can be changed if the solution calls for it.
The other network (2) is the main LAN within the 192.168.0.0/24 network. An Internet router is connected to this network, assigned IP 192.168.0.1. Devices on the LAN have 192.168.0.1 as their default GW.
The aim is to access the DMZ server (10.0.0.200) from the LAN via a NAT address of 192.168.0.200.
Please provide just the RouterOS firewall rules required to achieve the above.
To reduce superfluous inquiries, information about the current configuration of the router will be supplied upon satisfactory explanation of reason. .ie, Don't ask about Wifi interfaces, because it is not relevant to the request.
(1) A DMZ within the 10.0.0.0/24 network containing one server which has the address 10.0.0.200. The server thinks its default GW is 10.0.0.1, but this can be changed if the solution calls for it.
The other network (2) is the main LAN within the 192.168.0.0/24 network. An Internet router is connected to this network, assigned IP 192.168.0.1. Devices on the LAN have 192.168.0.1 as their default GW.
The aim is to access the DMZ server (10.0.0.200) from the LAN via a NAT address of 192.168.0.200.
Please provide just the RouterOS firewall rules required to achieve the above.
To reduce superfluous inquiries, information about the current configuration of the router will be supplied upon satisfactory explanation of reason. .ie, Don't ask about Wifi interfaces, because it is not relevant to the request.