network programing
Budget: $10 – $30 USD
1: Device 1 has eth0 interface connected with router and has an IP address
2: Device 2 has eth0 interface not connected to any router
3: device 3 has eth0 interface not connected to any router
3: device 1,2 and 2 have TTYUSB0 interfaces each.
I want to establish connection between these three computers by using TTYUSB0 and my device 2 and 3 will get IP address as well and with this way I can connect it to internet as well. Systems are Linux and use python to program. You can use TDMA. But there are not wireless devices on any kind. The computers will not be connected by ethernet port either. Only through Serial port. You can use virtual interfaces if you want.
2: Device 2 has eth0 interface not connected to any router
3: device 3 has eth0 interface not connected to any router
3: device 1,2 and 2 have TTYUSB0 interfaces each.
I want to establish connection between these three computers by using TTYUSB0 and my device 2 and 3 will get IP address as well and with this way I can connect it to internet as well. Systems are Linux and use python to program. You can use TDMA. But there are not wireless devices on any kind. The computers will not be connected by ethernet port either. Only through Serial port. You can use virtual interfaces if you want.