Raspberry Pi Zero PTZ Camera System
Budget: $100 – $400 USD
1st file; Create OS image file using Raspberry Pi OS Lite for a Raspberry Pi Zero 2 w to support a camera pan/tilt/zoom (digital zoom) system that will connect to a wifi router. System needs to be fully automated from boot to launch all programs related to the camera PTZ and router login. System to be set up for use with Chromium web browser. PWM signals for servos at GPIO 12 (pin 32) and 13 (pin 33). Login and router information will be set from Raspberry Pi Imager. Static IP will be set via SSH. Image file to be usable with Raspberry Pi Imager.
2nd file; HTML script for Chromium web browser that will support the Raspberry Pi Zero 2 w remote PTZ camera. Web page to display video stream and PTZ controls on the right side. PTZ button lay out, compass style pan = left/right, tilt = up/down with a return to center button in the center of the directional control buttons and a vertical slider bar under the buttons for zoom 1X (100%) to 20X (200%). HTML to be re-sizable for multi page display on monitor (up to 4 RPi Zero 2 w remote cameras may be used at one time). A modern/tech appearance is desired for the page layout.
Hardware description; Up to 4 Raspberry Pi Zero 2 W with 2 servos (pan/tilt) and a Raspberry Pi Camera Module 3 (NoIR or Standard) for the remote camera system. A Raspberry Pi 5 8GB running Raspberry Pi OS (full) will be used for a system hub to view and control the remote cameras. If more information is required just let me know.
2nd file; HTML script for Chromium web browser that will support the Raspberry Pi Zero 2 w remote PTZ camera. Web page to display video stream and PTZ controls on the right side. PTZ button lay out, compass style pan = left/right, tilt = up/down with a return to center button in the center of the directional control buttons and a vertical slider bar under the buttons for zoom 1X (100%) to 20X (200%). HTML to be re-sizable for multi page display on monitor (up to 4 RPi Zero 2 w remote cameras may be used at one time). A modern/tech appearance is desired for the page layout.
Hardware description; Up to 4 Raspberry Pi Zero 2 W with 2 servos (pan/tilt) and a Raspberry Pi Camera Module 3 (NoIR or Standard) for the remote camera system. A Raspberry Pi 5 8GB running Raspberry Pi OS (full) will be used for a system hub to view and control the remote cameras. If more information is required just let me know.