Flashing the OS into the hardware board having Nvidia Jetson Orin NX 16GB SOM module
Budget: ₹12,500 – ₹37,500 INR
I'm in need of a freelancer who can help me flash a Operating system into my Nvidia Jetson Orin NX 16GB SOM module.
Scope of Work -
1. Flashing & Configuration: Your primary task will be to install a operating system onto the hardware board. This operation must be precise and error-free to avoid potential issues with the board's functionality.
2. We will give the hardware setup and give the compliable base source code
3. Identify the issues if any (hardware or software) while flashing the OS into the hardware.
4. Fix the issue - hardware or software level
Hardware Setup:
• Jetson Orin NX device model: Jetson Orin NX 16GB
• NVME SSD: 250GB
• Operating System: Ubuntu 20.04
• *kernel version = 5.10
• Carrier board: Carrier board is designed by us and we are using the same.
Deliverables:
1. Successfully load the Operating system into the hardware setup.
2. Document: Steps to load the OS into the hardware setup
3. Compliable source code
4. Document having changes in the hardware (if any)
Immediate issue we are facing while loading the OS into the hardware:
Flashing operation is interrupted after sometime.
While attempting to flash the Operating system to Jetson Orin NX device using the provided flashing tool.
The process halts with the error message.
----------------
“Waiting for target to boot-up…
Timeout
Cleaning up…”
-------------
To be successful in this project, you should have experience in:
- working with Nvidia Jetson or similar hardware boards
- flashing operating systems onto embedded devices
- integrating custom libraries into Linux distributions
- Board bringing up specifically for the Invidia Jetson series SOM based designs
Scope of Work -
1. Flashing & Configuration: Your primary task will be to install a operating system onto the hardware board. This operation must be precise and error-free to avoid potential issues with the board's functionality.
2. We will give the hardware setup and give the compliable base source code
3. Identify the issues if any (hardware or software) while flashing the OS into the hardware.
4. Fix the issue - hardware or software level
Hardware Setup:
• Jetson Orin NX device model: Jetson Orin NX 16GB
• NVME SSD: 250GB
• Operating System: Ubuntu 20.04
• *kernel version = 5.10
• Carrier board: Carrier board is designed by us and we are using the same.
Deliverables:
1. Successfully load the Operating system into the hardware setup.
2. Document: Steps to load the OS into the hardware setup
3. Compliable source code
4. Document having changes in the hardware (if any)
Immediate issue we are facing while loading the OS into the hardware:
Flashing operation is interrupted after sometime.
While attempting to flash the Operating system to Jetson Orin NX device using the provided flashing tool.
The process halts with the error message.
----------------
“Waiting for target to boot-up…
Timeout
Cleaning up…”
-------------
To be successful in this project, you should have experience in:
- working with Nvidia Jetson or similar hardware boards
- flashing operating systems onto embedded devices
- integrating custom libraries into Linux distributions
- Board bringing up specifically for the Invidia Jetson series SOM based designs