Realtime High Speed Multi-Channel Data Acquisition and time logging Using LabVIEW and DAQmx Hardware
Budget: $30 – $250 USD
Realtime High Speed Multi-Channel Data Acquisition and time data logging Using LabVIEW and DAQmx Hardware.
Hello
I need to create a single LabVIEW VI on LabVIEW 2021 that will:
1. Read input Analog DC voltage signals. Input current signals (if possible) as well as digital (ON/OFF) signals from a variety of sensors (speed sensors, pressure sensors, hall effect sensors) and at a set rate (minimum 1 kHz), but allows for an increase to as fast as the DAQ device can handle.
2. These read signals are to be Displayed in real time on a panel with Graphs and gauges.
3. As well as log the incoming data to a file (preferred TDMS file type) along with their relevant time stamps in Milli-Seconds.
The DAQ device to be used is the USB 6002 NI (https://www.ni.com/en-za/support/model.usb-6002.html).
Multiple devices will be used to accommodate multiple channels.”
Hello
I need to create a single LabVIEW VI on LabVIEW 2021 that will:
1. Read input Analog DC voltage signals. Input current signals (if possible) as well as digital (ON/OFF) signals from a variety of sensors (speed sensors, pressure sensors, hall effect sensors) and at a set rate (minimum 1 kHz), but allows for an increase to as fast as the DAQ device can handle.
2. These read signals are to be Displayed in real time on a panel with Graphs and gauges.
3. As well as log the incoming data to a file (preferred TDMS file type) along with their relevant time stamps in Milli-Seconds.
The DAQ device to be used is the USB 6002 NI (https://www.ni.com/en-za/support/model.usb-6002.html).
Multiple devices will be used to accommodate multiple channels.”