Industrial Vacuum Process Sanity Check

I have an early-stage concept that cycles large containers between vacuum evacuation and nitrogen back-fill, and I’m looking for a quick reality check before moving toward detailed design. If you have a background in process engineering, vacuum applications, and industrial batch operations, your seasoned perspective is exactly what I need.

Here’s how I see it working:

I’ll send you a short write-up (one page plus a simple schematic) outlining the overall sequence, operating regime, and intended use case.

You review it at your convenience, then we jump on a 30–60 minute call.

During the call I’m hoping you can:

Tell me straight up whether the core idea is physically and operationally sound.

Share which factors typically matter most in comparable systems so I can focus my next round of work appropriately.

Flag any obvious pitfalls you’ve seen in the field — things like sequencing traps, pump-regime mismatches, or sealing challenges.

No calculations, detailed equipment selection, or procurement advice are required; this is strictly a high-level sanity check. If you’ve spent years designing or troubleshooting vacuum dryers, inert purge systems, or other batch vacuum processes, this should be a quick, engaging discussion focused on practical insight rather than detailed design.