Removal of internal wall and converting roof spacing (laying of T&G flooring) to roof space for storage.
Budget: $250 – $750 AUD
Removal of internal wall and converting roof spacing (laying of T&G flooring) to roof space for storage.
The dwelling consists of single storey, brick veneer on slab on ground. The roof is concrete tile and structure is "W" trusses at 600mm spacing.
The perimeter wall dimensions are 11.6m x 10m The internal wall I wish to remove I believe is non-loading bearing as there is a 20mm gap between the bottom chord of the truss and top plate of the wall frame.
However, its good practice to get a structural engineer to check for any other type of support it may provide (lateral).
In addition to removing the wall I want to install structural flooring in the roof space to use the roof space for storage of everyday house hold items.
The dwelling consists of single storey, brick veneer on slab on ground. The roof is concrete tile and structure is "W" trusses at 600mm spacing.
The perimeter wall dimensions are 11.6m x 10m The internal wall I wish to remove I believe is non-loading bearing as there is a 20mm gap between the bottom chord of the truss and top plate of the wall frame.
However, its good practice to get a structural engineer to check for any other type of support it may provide (lateral).
In addition to removing the wall I want to install structural flooring in the roof space to use the roof space for storage of everyday house hold items.