Large PVC Vinyl Electrical Door Wrap
Budget: $250 – $750 AUD
I'm seeking a skilled individual to create a door wrap for a large-sized electrical equipment split between 4 panels, specifically using PVC Vinyl material.
This project will entail:
- Accurately measuring the door to ensure a perfect fit.
- Designing and executing a wrap centered around my company's branding.
The ideal candidate will have:
- Extensive experience with PVC Vinyl materials.
- A portfolio which demonstrates proficiency in creating company-branded designs.
- A keen eye for detail and accuracy in sizing and fit.
Requirements:
- Recreating blue background equipment wrap that is seamlessly split between 4 panels. With company Logos.
- Additional white writing as per photos and schematics.
- Small circles with cross inside where the yellow, green, red and black circles are to indicate to tradesmen where to drill as these lights and buttons are installed after the wrap.
- Similar to point above rectangles and crosses made for the ammeter and ELR boxes.
Other Key Notes:
- All grouped lighting and switches have 100mm vertical spacing and 70mm horizontal spacing.
- The light and keys are 30mm in diameter, so the writing will need adequate spacing above.
- The larger lights that have “LV MAIN SWITCH” and “OUTGOING” are 45mm in diameter, so the writing will need adequate spacing.
- The rectangles that have “AM1” “ AM2” etc if you could make a center cross for these and also make a light box that is 90mm x 45mm.
- The handle that have “ISOLATOR” leave this off and we will make to suit once the door handle is in place.
Please reach out if you believe this project aligns well with your skillset.
This project will entail:
- Accurately measuring the door to ensure a perfect fit.
- Designing and executing a wrap centered around my company's branding.
The ideal candidate will have:
- Extensive experience with PVC Vinyl materials.
- A portfolio which demonstrates proficiency in creating company-branded designs.
- A keen eye for detail and accuracy in sizing and fit.
Requirements:
- Recreating blue background equipment wrap that is seamlessly split between 4 panels. With company Logos.
- Additional white writing as per photos and schematics.
- Small circles with cross inside where the yellow, green, red and black circles are to indicate to tradesmen where to drill as these lights and buttons are installed after the wrap.
- Similar to point above rectangles and crosses made for the ammeter and ELR boxes.
Other Key Notes:
- All grouped lighting and switches have 100mm vertical spacing and 70mm horizontal spacing.
- The light and keys are 30mm in diameter, so the writing will need adequate spacing above.
- The larger lights that have “LV MAIN SWITCH” and “OUTGOING” are 45mm in diameter, so the writing will need adequate spacing.
- The rectangles that have “AM1” “ AM2” etc if you could make a center cross for these and also make a light box that is 90mm x 45mm.
- The handle that have “ISOLATOR” leave this off and we will make to suit once the door handle is in place.
Please reach out if you believe this project aligns well with your skillset.