Fusion 360 Setup
Budget: €8 – €30 EUR
I am currently seeking a professional freelance expert with extensive experience in the use of Fusion 360 software and NCCAD9 Basic. The primary objective of this freelance position is to assist me with the setup of my CC-F1210 Wabeco 2.5 Axis CNC machine, which was purchased from Germany and uses "Kosy" as the Post Processor and NCCAD9 Basic software developed by MaxComputer in Germany.
As a relatively new user of both CNC technology and Fusion 360, I am seeking a knowledgeable professional who can provide guidance on the proper protocol and offer basic guidelines for approximately one hour. I do have 1 small part that I designed in Fusion 360 that we will be using as a sample part for this simple setup process.
The following areas require assistance:
1. Verification of settings in MANAGE/ Post Library in regards to the Kosy post-processor
2. Proper setup of Tool Library related to a basic/simple 1-piece design.
3. Setup to enable simulation of tool path
4. Tool Path setup to facilitate milling of the project.
5. Verify my setup for "Create NC Program"
The final goal of this project is to achieve a correct setup that enables the milling of a small part on my CNC machine. If you possess the required expertise and are interested in taking on this project, please don't hesitate to reach out to me.
As a relatively new user of both CNC technology and Fusion 360, I am seeking a knowledgeable professional who can provide guidance on the proper protocol and offer basic guidelines for approximately one hour. I do have 1 small part that I designed in Fusion 360 that we will be using as a sample part for this simple setup process.
The following areas require assistance:
1. Verification of settings in MANAGE/ Post Library in regards to the Kosy post-processor
2. Proper setup of Tool Library related to a basic/simple 1-piece design.
3. Setup to enable simulation of tool path
4. Tool Path setup to facilitate milling of the project.
5. Verify my setup for "Create NC Program"
The final goal of this project is to achieve a correct setup that enables the milling of a small part on my CNC machine. If you possess the required expertise and are interested in taking on this project, please don't hesitate to reach out to me.