Fusion PCB & Case Design
Budget: $15 – $25 USD
For my current university project I have to build a compact PCB whose only job is to collect data from several temperature sensors and route those readings to the rest of my prototype through simple wired connectors. Everything must be laid out and modelled inside Fusion 360, right down to the housing that will protect the board once it is fabricated.
Here is what I need from you:
• Create the full schematic and board layout in Fusion 360’s electronics workspace, optimised for straightforward sensor-integration and robust wired headers.
• Export clean Gerber/Drill files plus the native Fusion 360 design so I can iterate later.
• Model a 3-D printable enclosure in the same project file, dimensioned precisely to the finished PCB, with openings for the temperature-sensor cables, mounting holes and a snap-fit or screw-fit lid.
• Provide a short hand-off note that explains layer stack-up, connector footprints and recommended print settings for the case.
Everything has to stay within the toolchain of Fusion 360 so I can demonstrate the workflow during my assessment. If you have ideas that can make soldering, assembly or future revisions easier, feel free to include them—as long as we keep the focus on wired temperature sensors only.
I’ll respond quickly to questions and will test the design against my university requirements as soon as you share the files.
Here is what I need from you:
• Create the full schematic and board layout in Fusion 360’s electronics workspace, optimised for straightforward sensor-integration and robust wired headers.
• Export clean Gerber/Drill files plus the native Fusion 360 design so I can iterate later.
• Model a 3-D printable enclosure in the same project file, dimensioned precisely to the finished PCB, with openings for the temperature-sensor cables, mounting holes and a snap-fit or screw-fit lid.
• Provide a short hand-off note that explains layer stack-up, connector footprints and recommended print settings for the case.
Everything has to stay within the toolchain of Fusion 360 so I can demonstrate the workflow during my assessment. If you have ideas that can make soldering, assembly or future revisions easier, feel free to include them—as long as we keep the focus on wired temperature sensors only.
I’ll respond quickly to questions and will test the design against my university requirements as soon as you share the files.