Fusion 360 MTB Mudguard Redesign
Budget: $30 – $250 USD
I will supply the current STL of a front-fork mudguard for a Fox 38 mountainbike suspension. I need it rebuilt natively in Fusion 360, not merely converted from mesh, so that every feature is fully parametric and easy to tweak later.
Required tweaks
• Adjustments of the shape based on requirements
Key points
• Work directly in Fusion 360; the timeline should remain clean and fully editable.
• Maintain proper wall thicknesses for FDM.
• Edges must be filleted or chamfered where appropriate to avoid stress-risers.
• All faces should be solid-body geometry—no leftover mesh triangles.
Deliverables
1. Native .f3d file with organised browser and timeline
2. STEP and updated STL exports ready for print
3. Short note outlining the parameters you exposed for quick future edits (coverage length, mounting hole spacing, thickness, etc.)
I will test-fit the first print on a Fox 38; once everything aligns, the project is complete.
Example file is provided
Required tweaks
• Adjustments of the shape based on requirements
Key points
• Work directly in Fusion 360; the timeline should remain clean and fully editable.
• Maintain proper wall thicknesses for FDM.
• Edges must be filleted or chamfered where appropriate to avoid stress-risers.
• All faces should be solid-body geometry—no leftover mesh triangles.
Deliverables
1. Native .f3d file with organised browser and timeline
2. STEP and updated STL exports ready for print
3. Short note outlining the parameters you exposed for quick future edits (coverage length, mounting hole spacing, thickness, etc.)
I will test-fit the first print on a Fox 38; once everything aligns, the project is complete.
Example file is provided