Campervan Hardware Detailing Fusion360
Budget: £20 – £250 GBP
The cabinetry layout for my campervan is fully modelled in Fusion 360; what it lacks are the mechanical details that turn a concept into a build-ready file. I need you to open the existing model and integrate all of the following directly into the same .f3d file:
• Concealed hinges applied to the specified doors, aligned to realistic drill patterns and clearances.
• Soft-close drawer runners positioned and constrained so travel distances, clearances and screw locations are accurate.
• Push-button locks assigned to every door and drawer façade, with their latch plates referenced to the mating panels.
• Standard cam fittings (panel-to-panel) wherever flat-pack joins call for them, fully constrained for motion studies.
Every component should come either from the standard Fusion 360 library or imported manufacturer STEP files, then converted into rigid group components. Please keep joints, contact sets and parametric references intact so I can still update material thicknesses later without breaking the assembly.
Acceptance criteria
1. Updated Fusion 360 file opens error-free and appears in the same browser structure I supplied.
3. All screw holes and bore holes are modelled so a manufacturing can be generated directly.
Send back only the revised .f3d If you need clarifications on panel thickness or hardware brand, just ask and I’ll provide spec sheets.
• Concealed hinges applied to the specified doors, aligned to realistic drill patterns and clearances.
• Soft-close drawer runners positioned and constrained so travel distances, clearances and screw locations are accurate.
• Push-button locks assigned to every door and drawer façade, with their latch plates referenced to the mating panels.
• Standard cam fittings (panel-to-panel) wherever flat-pack joins call for them, fully constrained for motion studies.
Every component should come either from the standard Fusion 360 library or imported manufacturer STEP files, then converted into rigid group components. Please keep joints, contact sets and parametric references intact so I can still update material thicknesses later without breaking the assembly.
Acceptance criteria
1. Updated Fusion 360 file opens error-free and appears in the same browser structure I supplied.
3. All screw holes and bore holes are modelled so a manufacturing can be generated directly.
Send back only the revised .f3d If you need clarifications on panel thickness or hardware brand, just ask and I’ll provide spec sheets.