Fix & finalise 3D Abaqus model for geotechnical simulation
Budget: $30 – $250 AUD
Job Description:
I have a 3D Abaqus model of a buried anchor in clay. The model is mostly set up but currently has errors and does not run. I need a freelancer to resolve the issues, complete the setup, and extract key outputs.
Scope of Work:
Debug the attached .cae model and fix all errors
Apply:
Vertical displacement: 0.25 m at the anchor head
Horizontal displacement: 1.0 m at the anchor head
Soil is undrained clay, represented using Mohr-Coulomb with φ = 0° (Tresca behaviour)
Undrained shear strength: sᵤ(z) = 1 kPa/m × z
Elastic modulus: E = 500 × sᵤ
Effective unit weight: γ′ = 4.5 kN/m³
Pile is elastic and fully embedded
Extract and plot reaction force vs. displacement at the anchor head
What I’m Looking For:
Strong experience with Abaqus geotechnical simulations
Ability to clearly walk me through the changes made
Final delivery must include:
Working simulation files
Force–displacement plots
Short explanation of what was fixed and why
Screenshot of the final frame from the simulation as proof of completion (required for selection)
Notes:
The .cae file can be found here: https://drive.google.com/file/d/1GoZvd6KHYVRPEOTNiV9djkBRA8JtUgdb/view?usp=sharing
Please do not apply if you haven’t reviewed the file or if you’re submitting a generic or AI-generated pitch
I have a 3D Abaqus model of a buried anchor in clay. The model is mostly set up but currently has errors and does not run. I need a freelancer to resolve the issues, complete the setup, and extract key outputs.
Scope of Work:
Debug the attached .cae model and fix all errors
Apply:
Vertical displacement: 0.25 m at the anchor head
Horizontal displacement: 1.0 m at the anchor head
Soil is undrained clay, represented using Mohr-Coulomb with φ = 0° (Tresca behaviour)
Undrained shear strength: sᵤ(z) = 1 kPa/m × z
Elastic modulus: E = 500 × sᵤ
Effective unit weight: γ′ = 4.5 kN/m³
Pile is elastic and fully embedded
Extract and plot reaction force vs. displacement at the anchor head
What I’m Looking For:
Strong experience with Abaqus geotechnical simulations
Ability to clearly walk me through the changes made
Final delivery must include:
Working simulation files
Force–displacement plots
Short explanation of what was fixed and why
Screenshot of the final frame from the simulation as proof of completion (required for selection)
Notes:
The .cae file can be found here: https://drive.google.com/file/d/1GoZvd6KHYVRPEOTNiV9djkBRA8JtUgdb/view?usp=sharing
Please do not apply if you haven’t reviewed the file or if you’re submitting a generic or AI-generated pitch