Doing Static Analysis
Budget: $10 – $70 USD
Doing static analysis of prosthetic knee using ANSYS Workbench software where:
1. Applied Load
1. The applied load (patient weight) = 1200 N at angle (15.16) of range motion
2. The force generated from damper = 1565.5 N
2. Boundary Conditions
Fixed geometry from the bottom
3. The required results:
1. Von-mices stress
2. Total and direct deformation
3. Shear stress
5. safety factor
The freelancer must achieve an accuracy error (0.1%) and accepted mech quality and know how to dealing with (Artificially High Stress).
1. Applied Load
1. The applied load (patient weight) = 1200 N at angle (15.16) of range motion
2. The force generated from damper = 1565.5 N
2. Boundary Conditions
Fixed geometry from the bottom
3. The required results:
1. Von-mices stress
2. Total and direct deformation
3. Shear stress
5. safety factor
The freelancer must achieve an accuracy error (0.1%) and accepted mech quality and know how to dealing with (Artificially High Stress).