12v Distribution Hub -- 2
Budget: £20 – £250 GBP
A 12V DC Power Distribution Hub.
12V Input via 2 pin plug and socket, pads on pcb for connecting leads from 2 pin socket.
6 output sockets 2.1mm x 5.5mm each rated at 5A
2 of USB 2.0 sockets rated at 2.1A for charging/supply
Outputs to be protected against short circuit and overload with Positive Temperature Coefficient Thermistor
small dim red LED for circuit at fault, to clear down when fault is rectified.
Approximate enclosure dimensions Length 120mm Width 75mm Depth 40mm
PCB to be mounted by 4 screws onto pillars.
12V Input via 2 pin plug and socket, pads on pcb for connecting leads from 2 pin socket.
6 output sockets 2.1mm x 5.5mm each rated at 5A
2 of USB 2.0 sockets rated at 2.1A for charging/supply
Outputs to be protected against short circuit and overload with Positive Temperature Coefficient Thermistor
small dim red LED for circuit at fault, to clear down when fault is rectified.
Approximate enclosure dimensions Length 120mm Width 75mm Depth 40mm
PCB to be mounted by 4 screws onto pillars.