Design a 10x10 Polycarbonate Roofing Structure
Budget: $30 – $250 USD
We are working on a small project involving the installation of 16mm Lexan multiwall polycarbonate sheets over a 10 ft x 10 ft inverted-V style structure in Puerto Rico. The frame will be built using heat-treated wood.
We’re reaching out to request your support with:
• Framing design guidance (rafter spacing, purlin layout, etc.)
• Recommendations based on local wind loads and PR building codes
• Suggested installation pattern and accessory system (we are considering the 8mm Aluminum Base & Cap system, attached for reference)
Your expertise in glazing design and shop drawings would be valuable in getting this right.
Please let us know if you can assist, and feel free to share your quote or any additional information you need from our side.
We’re reaching out to request your support with:
• Framing design guidance (rafter spacing, purlin layout, etc.)
• Recommendations based on local wind loads and PR building codes
• Suggested installation pattern and accessory system (we are considering the 8mm Aluminum Base & Cap system, attached for reference)
Your expertise in glazing design and shop drawings would be valuable in getting this right.
Please let us know if you can assist, and feel free to share your quote or any additional information you need from our side.
Related categories:
Building Architecture
Structural Engineering
Interior Design
Engineering Drawing
3D Architecture