Wearable Sensor Vest Prototype — GPS/IMU + Heart Rate (PCB, Firmware, Enclosure)
Budget: ₹75,000 – ₹150,000 INR
I'm looking for an experienced hardware/embedded engineer to build a first working prototype of a wearable sensor vest for athlete movement and heart rate monitoring.
Scope:
Sensor 1: GPS + 9-axis IMU (accelerometer, gyroscope, magnetometer) — for speed, distance, direction, and position tracking
Sensor 2: Heart rate sensing — open to your recommendation on approach (optical/PPG vs. ECG) for a first prototype, given the vest will be used during physical activity/sport
Data transmission: BLE to a nearby tablet/laptop
Physical form: lightweight vest/garment insert, worn on the back, under 150g target, minimum 3-4 hour battery life, sweat-resistant
What I need from you:
Schematic + PCB design
Firmware for both sensor sets
A basic enclosure (3D printed is fine for this stage)
A working, testable prototype — does not need to be manufacturing-ready
Please include in your proposal:
Your relevant experience with wearable/sensor hardware (portfolio examples welcome)
Your recommended approach for heart rate sensing, and why
Itemized estimate: hours and cost for hardware design, firmware, and enclosure separately
Realistic timeline
I'm open to a phased approach (e.g. a smaller validation stage before full build) if you think that reduces risk — happy to hear your recommendation.
NDA available before sharing further technical detail. Please don't include personal contact info in your bid per platform guidelines — I'll reach out through the platform to shortlist.
Target timeline: 4–8 weeks. Open to a phased approach if that's faster/lower-risk, as long as the total stays within that window.
Scope:
Sensor 1: GPS + 9-axis IMU (accelerometer, gyroscope, magnetometer) — for speed, distance, direction, and position tracking
Sensor 2: Heart rate sensing — open to your recommendation on approach (optical/PPG vs. ECG) for a first prototype, given the vest will be used during physical activity/sport
Data transmission: BLE to a nearby tablet/laptop
Physical form: lightweight vest/garment insert, worn on the back, under 150g target, minimum 3-4 hour battery life, sweat-resistant
What I need from you:
Schematic + PCB design
Firmware for both sensor sets
A basic enclosure (3D printed is fine for this stage)
A working, testable prototype — does not need to be manufacturing-ready
Please include in your proposal:
Your relevant experience with wearable/sensor hardware (portfolio examples welcome)
Your recommended approach for heart rate sensing, and why
Itemized estimate: hours and cost for hardware design, firmware, and enclosure separately
Realistic timeline
I'm open to a phased approach (e.g. a smaller validation stage before full build) if you think that reduces risk — happy to hear your recommendation.
NDA available before sharing further technical detail. Please don't include personal contact info in your bid per platform guidelines — I'll reach out through the platform to shortlist.
Target timeline: 4–8 weeks. Open to a phased approach if that's faster/lower-risk, as long as the total stays within that window.