STM32 Nucleo F767ZI based graphical user interface on TFT LCD ST7789 2-inch and Raspberry Pi 4Touchscreen
Budget: $30 – $250 USD
The embedded system comprises 2 STM32 boards connected to their own 7 sensors, 1 motor, and 3 relays. Each is connected to the central Raspberry Pi 4 board. The RIGHT STM32 board also has a TFT ST7789 2inch display. The Raspberry Pi has its own 5-inch display (connected via HDMI) and is connected to a battery BMS via UART and controls the ON/OFF switching of the exoskeleton system driven via a 48V 10A relay. The Raspberry Pi also controls the operation of a 5V air-pump via a relay able to deliver 1.5A
We require the following tasks to be carried out:
1.Graphical user interface (GUI) developed for the STM32 to drive the ST7789 display.
2.GUI developed for the Raspberry Pi display.
3.Software for the Right-leg STM32 microcontroller.
4.Software for the Raspberry Pi.
5.Software for the Left-leg STM32 microcontroller.
We require the following tasks to be carried out:
1.Graphical user interface (GUI) developed for the STM32 to drive the ST7789 display.
2.GUI developed for the Raspberry Pi display.
3.Software for the Right-leg STM32 microcontroller.
4.Software for the Raspberry Pi.
5.Software for the Left-leg STM32 microcontroller.