12V Embedded Controller PCB Design
Budget: ₹1,500 – ₹12,500 INR
I’m building a compact embedded platform that runs from a single 12 V supply and I need a purpose-built PCB to act as the system’s brain. The board has to host a microcontroller at its core, interface cleanly with several sensors, and drive multiple actuators, all while keeping noise low and layout tight.
Here’s what I’m looking for:
• Complete schematic capture showing microcontroller, sensor inputs, actuator drivers, power-conditioning and protection circuitry
• PCB layout ready for manufacture (Gerber/ODB++ files, drill, pick-and-place, clear layer stack details)
• Bill of materials with part numbers that are currently available from major distributors
• Basic power-up simulation or design rule check report proving the 12 V rail and on-board regulators stay within spec
• Brief design notes that explain key decisions and allow a future engineer to iterate without guesswork
If you normally work in Altium, KiCad, or Eagle that’s perfect—just let me know which one so I can keep the files in my own toolchain. Once I review the schematic you provide, I’ll sign off before you move to layout; after layout, I’ll do the same before the final fabrication package is released.
Looking forward to collaborating and seeing your ideas for a clean, reliable 12 V embedded controller board.
Here’s what I’m looking for:
• Complete schematic capture showing microcontroller, sensor inputs, actuator drivers, power-conditioning and protection circuitry
• PCB layout ready for manufacture (Gerber/ODB++ files, drill, pick-and-place, clear layer stack details)
• Bill of materials with part numbers that are currently available from major distributors
• Basic power-up simulation or design rule check report proving the 12 V rail and on-board regulators stay within spec
• Brief design notes that explain key decisions and allow a future engineer to iterate without guesswork
If you normally work in Altium, KiCad, or Eagle that’s perfect—just let me know which one so I can keep the files in my own toolchain. Once I review the schematic you provide, I’ll sign off before you move to layout; after layout, I’ll do the same before the final fabrication package is released.
Looking forward to collaborating and seeing your ideas for a clean, reliable 12 V embedded controller board.