ESP32-Based Router Board PCB Design

I need an experienced PCB designer to convert my fully working and tested hardware prototype into a final production-ready single board PCB.

Complete handoff document is ready to share immediately after award — it includes full BOM, schematic netlist, all GPIO connections, power architecture, component list and layout requirements. You just need to follow the document. No guesswork or design decisions needed from your side.

About the Board:
This is an ESP32-based modular router board with wired Ethernet capability. It is a single board that replaces a prototype built from off-the-shelf modules.

Key Components:

ESP32-WROOM-32 (main MCU)

W5500 LQFP-48 (SPI Ethernet controller)

MP1584EN (3.3V fixed buck converter)

USBLC6 ESD protection

RJ45 Ethernet connector (with magnetics)

USB-C power input connector

RGB LED + tactile push button

2×8 right-angle expansion header

All passives (resistors, capacitors, inductor)
Board Specifications:

Size: 100mm × 80mm

Layers: 2-layer PCB

Thickness: 1.6mm

Standard: IPC-2221 Class B

Surface finish: HASL or ENIG
Required Deliverables:

Complete schematic file (KiCad or Altium)

2-layer PCB layout file

Gerber files (RS-274X format, zipped, ready for JLCPCB)

Drill files

Production BOM (.xlsx)

Assembly drawing (.pdf)

3D model (.step)
Important Notes:

Must have prior experience with ESP32 or similar IoT/embedded boards

Please share relevant portfolio samples when bidding

Schematic must be reviewed and approved by me before PCB layout begins

All files must pass DRC before delivery