DWIN 8” Display UI Development

I have a DWIN DMG12800C080_03WN 8-inch TFT already wired to an ESP32 over UART. The goal is to create a clean DGUS–based interface that shows live temperature, humidity and short status text coming from the ESP32 as easy-to-read numeric values. No charts are needed at this stage, but I’m open to discussing them later if the design allows a quick add-on.

The job covers:
• Building the DGUS project with clear pages/areas for the two numeric readings and one text field.
• Selecting appropriate fonts, colours and touch areas (if useful) so the data is readable at a glance.
• Providing the compiled .HMI / .BIN files plus the editable project, ready to load through the DWIN toolchain.
• Supplying a small example sketch for the ESP32 (Arduino or ESP-IDF) that pushes sample data to the display, demonstrating the exact packet format you expect.

Acceptance criteria
1. After flashing, the display shows the three fields updating smoothly from the ESP32 demo code.
2. No flicker or ghosting; values refresh at least once per second without freezing other elements.
3. All project files and a brief step-by-step flashing guide are delivered so I can reproduce the setup on a new unit.

If you have prior work on DWIN DGUS screens or similar UART-driven HMIs, a quick mention (and screenshot if handy) will help me gauge fit.