DMX - Led Pixel Board - RDM

We need a board that "translate" signal from DMX to led strip pixel adressable.
Need to integrate RGB and RGBW pixel in various protocol, with clock or only data.
Only one data signal needed (170 rgb pixel or 128 rgbw pixel to complete universe)
-Possibilities to set start adress
-Possibilities to control multiple pixel as one pixel (grouping for have total of 2x or 3x o 4x pixel controlled)
-Setting IC ,Address and Grouping by dipswitch or other way accepted (also usb serial with proprietary software)
-ALL SETTINGS NEED ALSO TO BE SETTED BY RDM
-Usb or serial connector for upload firmware

We are open to every system from arduino to anything.
Need to be thinked in hardware and software side.

Other this one we need a variant with pwm rgbw output with same feature like RDM, start adress settings,

To be consigned:
Schematics (Easy Eda)
Bom (with product code and component choosed inside Easy Eda and Jlc Pcb Assembled)
PCB Schematics (Easy Eda)
Easy Eda project

Folder Code for Visual Studio Code
Integration in Platformio is better for us