Controlling Iron Core Linear Motor with Panasonic Driver
Budget: $50 – $200 AUD
We have a Ironcore Linear Motor that we need to control as per the below details:
We will have the following Buttons:
1) Set End Position (The Linear Motor will move slowly with low torque till the motor is stopped by the mechanical stopper. Linear Motor will move back some steps to register the End Position)
2) Set Start Position (The Linear Motor will move slowly with low torque till the motor is stopped by the mechanical stopper. Linear Motor will move back some steps to register the Start Position)
3) Set Linear distance of movement: 0 to 100
4) Set speed of movement: 0 to 100
5) STOP
We will have the following Buttons:
1) Set End Position (The Linear Motor will move slowly with low torque till the motor is stopped by the mechanical stopper. Linear Motor will move back some steps to register the End Position)
2) Set Start Position (The Linear Motor will move slowly with low torque till the motor is stopped by the mechanical stopper. Linear Motor will move back some steps to register the Start Position)
3) Set Linear distance of movement: 0 to 100
4) Set speed of movement: 0 to 100
5) STOP