Hydroponic system developer
Budget: ₹75,000 – ₹150,000 INR
Log in
Device No.
User name
Password
Once logged in then display the Device number/ Container number
It should show the current reading and the set value of the below mention
1 Room Temp --------- Set Temp 25 offset range -+2
2. Humidity ……..
3. CO2 -------
4. Fill up time -----------
5. fill up sequence
6 Light on time__________
7 Light Duration Time ------------
8. dissolved oxygen sensor kit ------------
9 PH sensor --------
10. conductivity sensor
11. flow sensor value
12 Liquid Temp
13. Light Selection/ Light Activation
14. Atmosphere O2 sensor
15. level sensor both empty and full
All this value can be stored as programs which can be recalled ( At least 10000) programs shuld be able to save.
Every parameter can be copied to a new program number and if any changes in any values can be saved as a new program name.
Flow.
1. If room temp range is between 22 to 25 the relay will on at the time when sensor reads 25 and cut off when it reaches 22.
2. If room humidity range is between 60% to70% the relay will on for a set time and wait for some set time and reads the value and if its not between the value it will repeat the same . The set time will be different according to the set humidity value
3. Co2 Same as humidity function
4. Fill up time set a time to open the relay which control the solenoid
5. Fill up sequence means there are 20 solenoids so at a time only 2 of them should only open
6. There will be 64 light controller selection of light activation
7. at the time when sensor reads 65 and cut off when it reaches 22.
8. you need independent sensor nodes which will be connected to individual containers. Each of them will have a unique id.
9. the device will have all the listed sensors and actuators[solenoid, relay, light ....]
10. the device will save the data in the storage. The data can be transferred to a SERVER to & From.
12. the device will have not have a display everything thru webpage
13. the device will have only web interface to set the various threshold parameters.
14. the display panel will show the real-time data and the set threshold value. show it in the form of graph plots depending on the display type
15. the device will control the actuators based on the real-time input and set threshold values.
16. devices to communicate to a central server
17. external power supply to the boards
18. preferred controller board BeagleBone Black (50 pcs in our stock)
19. Display will be only used for service purpose and it should be removable.
20.Suggest the best sensor modules in small budget
21 There will be 40 unit now and should have the option to add more
22.HDMI display also required which and do all operations but It should be optional.
Device No.
User name
Password
Once logged in then display the Device number/ Container number
It should show the current reading and the set value of the below mention
1 Room Temp --------- Set Temp 25 offset range -+2
2. Humidity ……..
3. CO2 -------
4. Fill up time -----------
5. fill up sequence
6 Light on time__________
7 Light Duration Time ------------
8. dissolved oxygen sensor kit ------------
9 PH sensor --------
10. conductivity sensor
11. flow sensor value
12 Liquid Temp
13. Light Selection/ Light Activation
14. Atmosphere O2 sensor
15. level sensor both empty and full
All this value can be stored as programs which can be recalled ( At least 10000) programs shuld be able to save.
Every parameter can be copied to a new program number and if any changes in any values can be saved as a new program name.
Flow.
1. If room temp range is between 22 to 25 the relay will on at the time when sensor reads 25 and cut off when it reaches 22.
2. If room humidity range is between 60% to70% the relay will on for a set time and wait for some set time and reads the value and if its not between the value it will repeat the same . The set time will be different according to the set humidity value
3. Co2 Same as humidity function
4. Fill up time set a time to open the relay which control the solenoid
5. Fill up sequence means there are 20 solenoids so at a time only 2 of them should only open
6. There will be 64 light controller selection of light activation
7. at the time when sensor reads 65 and cut off when it reaches 22.
8. you need independent sensor nodes which will be connected to individual containers. Each of them will have a unique id.
9. the device will have all the listed sensors and actuators[solenoid, relay, light ....]
10. the device will save the data in the storage. The data can be transferred to a SERVER to & From.
12. the device will have not have a display everything thru webpage
13. the device will have only web interface to set the various threshold parameters.
14. the display panel will show the real-time data and the set threshold value. show it in the form of graph plots depending on the display type
15. the device will control the actuators based on the real-time input and set threshold values.
16. devices to communicate to a central server
17. external power supply to the boards
18. preferred controller board BeagleBone Black (50 pcs in our stock)
19. Display will be only used for service purpose and it should be removable.
20.Suggest the best sensor modules in small budget
21 There will be 40 unit now and should have the option to add more
22.HDMI display also required which and do all operations but It should be optional.