22KW EV charging device
Budget: $250 – $750 USD
22 Kw Charger for Individual Use
Expectations
1) Home charger will have type2 cable socket
2) This device must be suitable for both three-phase and normal 220v electricity according to the voltage value that the user can access.
3) There will be rgb leds working with 12v and they need to be run with certain diagrams from the processor (for example, blue when charging, green when the charge is finished and full.)
4) The cc and cp outputs in the type 2 socket must be found on the motherboard, and from these values, the battery should continue to charge according to the full charge.
5) At the same time, charging can be started with a reset button, start stop button and optionally rfdi.
6) The voltage and current values entering the vehicle must be kept constant.
7) current protection contactor and fuse systems must be present in the device
Expectations
1) Home charger will have type2 cable socket
2) This device must be suitable for both three-phase and normal 220v electricity according to the voltage value that the user can access.
3) There will be rgb leds working with 12v and they need to be run with certain diagrams from the processor (for example, blue when charging, green when the charge is finished and full.)
4) The cc and cp outputs in the type 2 socket must be found on the motherboard, and from these values, the battery should continue to charge according to the full charge.
5) At the same time, charging can be started with a reset button, start stop button and optionally rfdi.
6) The voltage and current values entering the vehicle must be kept constant.
7) current protection contactor and fuse systems must be present in the device
Related categories:
Electronics
Microcontroller
Circuit Design
Battery Charging and Batteries
PCB Design and Layout