automated cooling system -- 2
Budget: $30 – $250 USD
Hello,
I want to make an automated cooling system with a water pump. There has to be 1 rotary encoder, 1 pump, 2 solenoids, 1 absolute pressure sensor, rotary switch, 1.44 inch Oled TFT LCD, the current detector for solenoid and pump, voltage detection, tank low-level reading with resistance. Also, our pump is 24 volts. The voltage supply and the solenoids are 12volt. We can use Arduino nano/ micro/ pro mini modules (or ATmega328 microprocessor) or STM32 modules (or ARM 32 Cortex-M3 CPU).
I want to read the pressure sensor and trigger the pump from low to high and open solenoids in different conditions.
I need a schematic and PCB design and a code.
Thank you
I want to make an automated cooling system with a water pump. There has to be 1 rotary encoder, 1 pump, 2 solenoids, 1 absolute pressure sensor, rotary switch, 1.44 inch Oled TFT LCD, the current detector for solenoid and pump, voltage detection, tank low-level reading with resistance. Also, our pump is 24 volts. The voltage supply and the solenoids are 12volt. We can use Arduino nano/ micro/ pro mini modules (or ATmega328 microprocessor) or STM32 modules (or ARM 32 Cortex-M3 CPU).
I want to read the pressure sensor and trigger the pump from low to high and open solenoids in different conditions.
I need a schematic and PCB design and a code.
Thank you