TI CC2652 Zigbee application
Budget: $30 – $250 USD
I need software for a CC2652 chip from TI. The chip should function as a zigbee end device and be able to do the following:
- run periodic probes on a HC-SR04 ultrasonic sensor through the sensor controller studio (10 readings once an hour). I have a working sensor controller studio project if needed.
- upon pressing a button, the device should automatically join an existing zigbee network. When flashing the chip, it should be possible to define the PAN ID of the network.
- when the measurement is triggered by the Sensor Controller, send the measurements via zigbee to the controller.
- always sleep and wake up for the measurements
It should be fairly straight forward. I have no electrical engineering knowledge and have done most of the work already but need a professional opinion to optimize the work.
- run periodic probes on a HC-SR04 ultrasonic sensor through the sensor controller studio (10 readings once an hour). I have a working sensor controller studio project if needed.
- upon pressing a button, the device should automatically join an existing zigbee network. When flashing the chip, it should be possible to define the PAN ID of the network.
- when the measurement is triggered by the Sensor Controller, send the measurements via zigbee to the controller.
- always sleep and wake up for the measurements
It should be fairly straight forward. I have no electrical engineering knowledge and have done most of the work already but need a professional opinion to optimize the work.