Zephyr Project
Budget: $30 – $250 USD
Develop NRF52840 project on zephyr reading following sensors:
1. LIS2MDL
2. LIS3DH
3. BME688
4. APDS 9306
1. MCU sleep current should be less than 10uA
2. All sensors to put in low power mode during MCU sleep mode
3. Configure interrupt to wake up MCU on vibration detected from LIS3DH
4. Configure two clocks, one with 30 minute interval (read sensor and sleep) and second with 6 hour interval (read sensor and sleep)
5. Display log output using RTT (redirect to RTT)
6. Project should be in vscode
1. LIS2MDL
2. LIS3DH
3. BME688
4. APDS 9306
1. MCU sleep current should be less than 10uA
2. All sensors to put in low power mode during MCU sleep mode
3. Configure interrupt to wake up MCU on vibration detected from LIS3DH
4. Configure two clocks, one with 30 minute interval (read sensor and sleep) and second with 6 hour interval (read sensor and sleep)
5. Display log output using RTT (redirect to RTT)
6. Project should be in vscode