Simple ESP32 circuit PCB board update and adjustments
Budget: $30 – $250 AUD
I need assistance with building a PCB on EasyEDN.
It is a simple and standard ESP32 design, placed inside a small compartment.
The components include:
1x ESP32
2x Servos
2x Voltage regulators
1x RGB LEDs
1x Piezo passive speaker
1x Temperature Sensor
1x Moisture Sensor
I2C
Programmer circuit (this might need to be removed due to size constraints)
PlatformIO
C programming language
Your responsibilities include:
1. Complete and validate the design.
2. Assisting with Bill Of Material (BOM)
3. Ensuring the PCB manufacturers have the components needed. (eg: jlcpcb , nextpcb , ...)
4. Writing a test code to ensure all components functioning as desired correctly. (Servo movement , LED blinking, Piezo speaker siren & melody)
It is a simple and standard ESP32 design, placed inside a small compartment.
The components include:
1x ESP32
2x Servos
2x Voltage regulators
1x RGB LEDs
1x Piezo passive speaker
1x Temperature Sensor
1x Moisture Sensor
I2C
Programmer circuit (this might need to be removed due to size constraints)
PlatformIO
C programming language
Your responsibilities include:
1. Complete and validate the design.
2. Assisting with Bill Of Material (BOM)
3. Ensuring the PCB manufacturers have the components needed. (eg: jlcpcb , nextpcb , ...)
4. Writing a test code to ensure all components functioning as desired correctly. (Servo movement , LED blinking, Piezo speaker siren & melody)