Schematic validation and PCB design
Budget: $250 – $750 USD
i have a schematic and BOM in the form of a .prjpcb, an .schdoc and a .pdf
i need to have the schematic validated, and a PCB designed and ready to prototype.
i also need code written to run the module. code output 0.50V at startup then run every 100ms:
if shunt sense <45mV AND Vout <1.00V increment Vout +0.01V
if shunt >45mV decrement Vout -0.01V
wait 100ms then repeat
i will prototype the control module, load your code, validate the operation of the module and then pay
i need to have the schematic validated, and a PCB designed and ready to prototype.
i also need code written to run the module. code output 0.50V at startup then run every 100ms:
if shunt sense <45mV AND Vout <1.00V increment Vout +0.01V
if shunt >45mV decrement Vout -0.01V
wait 100ms then repeat
i will prototype the control module, load your code, validate the operation of the module and then pay