STM32F042 + OLED + Canbus Data / Need update or FIX
Budget: $10 – $50 USD
I have project for small STM32F042 and Canbus + OLED SSD1306.
What work:
- canbus prop configured, read/send canbus data
- OLED display sample graphics
What need to do:
- after power reset display not work, I need upload program again
- add display data coresponding with incoming canbus data (I can implement canbusdata reading)
I use STM32F042 with internal Crystal. Hardware tested (without display) on many my other projects and work perfect.
I work with CubeIDE, and I need fully tested program to open in CubeIDE and upload (full program, not only simple one file main.c, because is not FULL program data).
What canbus data need to be display? Actual gear 1/2/3/4/5 and drive mode choosed C/S/M/A
What work:
- canbus prop configured, read/send canbus data
- OLED display sample graphics
What need to do:
- after power reset display not work, I need upload program again
- add display data coresponding with incoming canbus data (I can implement canbusdata reading)
I use STM32F042 with internal Crystal. Hardware tested (without display) on many my other projects and work perfect.
I work with CubeIDE, and I need fully tested program to open in CubeIDE and upload (full program, not only simple one file main.c, because is not FULL program data).
What canbus data need to be display? Actual gear 1/2/3/4/5 and drive mode choosed C/S/M/A