PCB gerber file and BOM list (BTC asic mining)
Budget: $30 – $250 USD
We are developing a new type of asic miner with the BM1398 chip from Bitmain
The PCB should fit min. 300 Chips or even more and should be integrated with PSU:
For the controller we will use:
https://www.raspberrypi.org/products/raspberry-pi-3-model-b/
We will be needing 4 holes on the print around each chip as we will be adding a special cooling device on top of the whole plate that needs to be connected securely to work perfectly.
All of it needs to be EMC tested and approved with CE certificates.
The Size of the board should be 460mm x 460mm.
The software that we will use on the controller should CFGminer
My end goal is to build my own asic btc miner so I ONLY NEED THE GERBER FILE WITH ALL THE CHIPS SPOTS so if you contact and don’t know what your talking about I will not respond make shure you KNOW WHAT YOUR DOING IF YOU DO NOT THEN DO NOT THEN DO NOT CONTACT ME
The PCB should fit min. 300 Chips or even more and should be integrated with PSU:
For the controller we will use:
https://www.raspberrypi.org/products/raspberry-pi-3-model-b/
We will be needing 4 holes on the print around each chip as we will be adding a special cooling device on top of the whole plate that needs to be connected securely to work perfectly.
All of it needs to be EMC tested and approved with CE certificates.
The Size of the board should be 460mm x 460mm.
The software that we will use on the controller should CFGminer
My end goal is to build my own asic btc miner so I ONLY NEED THE GERBER FILE WITH ALL THE CHIPS SPOTS so if you contact and don’t know what your talking about I will not respond make shure you KNOW WHAT YOUR DOING IF YOU DO NOT THEN DO NOT THEN DO NOT CONTACT ME