PCB design help
Budget: ₹600 – ₹6,000 INR
Hi, i am looking for guys to help me in completing my schematics for the following ones:
1) ESP32 based board
2)GD32/W80X series/similar (any one of the ic based board)
3)AT32F435/similar ic based board
4) Power distribution board based on TX4131L
5)GPS module based on ATGM332D-5N and another one based on L86 GPS module.
I have partially completed the above given circuits schematics to some extent and need assistance in completing the whole boards especially in the calculation part and pcb routing.
I need assistance in completing the circuit and route the board into compact shape within 4.9×3.9 cm ,2 layer (preferable) or 4 layers, double sided. Check the model reference image for board layout.
Please note that the schematics is not Fully completed and requires impedence control for the esp32 ,GPS and calculations for the voltage regulator among others.
Take a look at the partially completed schematics i have attached with this request for the esp32,GPS module and GD32. The time is critical only 1 week of time.
Total boards: based on the above given ones
A) No.of boards who's schematics need to be completed and pcb routed: 4 (ex: esp32 , voltage regulator board.)
B) No.of boards which requires design review and minor changes: 2 (ex: gps boards)
Important:
A) Don't apply without reading/seeing any of the content here and also don't apply if you don't know calculations.
B) only apply if you to use ESD protection using TVs diodes, filter design and impedence matching stuffs.
C)The project is time critical so,if you can't deliver within a week then don't apply.
D) Creation of footprint and schematic module may be present in the design for some components.
Special conditions:
A)The Boards on s.no : 2&3 will change over time after fixing the board specs and chip. The specs and chip specifications will be noticed to the selected freelancer.
B) Advance payment will not be entertained.
C) Budget extension will not be entertained
1) ESP32 based board
2)GD32/W80X series/similar (any one of the ic based board)
3)AT32F435/similar ic based board
4) Power distribution board based on TX4131L
5)GPS module based on ATGM332D-5N and another one based on L86 GPS module.
I have partially completed the above given circuits schematics to some extent and need assistance in completing the whole boards especially in the calculation part and pcb routing.
I need assistance in completing the circuit and route the board into compact shape within 4.9×3.9 cm ,2 layer (preferable) or 4 layers, double sided. Check the model reference image for board layout.
Please note that the schematics is not Fully completed and requires impedence control for the esp32 ,GPS and calculations for the voltage regulator among others.
Take a look at the partially completed schematics i have attached with this request for the esp32,GPS module and GD32. The time is critical only 1 week of time.
Total boards: based on the above given ones
A) No.of boards who's schematics need to be completed and pcb routed: 4 (ex: esp32 , voltage regulator board.)
B) No.of boards which requires design review and minor changes: 2 (ex: gps boards)
Important:
A) Don't apply without reading/seeing any of the content here and also don't apply if you don't know calculations.
B) only apply if you to use ESD protection using TVs diodes, filter design and impedence matching stuffs.
C)The project is time critical so,if you can't deliver within a week then don't apply.
D) Creation of footprint and schematic module may be present in the design for some components.
Special conditions:
A)The Boards on s.no : 2&3 will change over time after fixing the board specs and chip. The specs and chip specifications will be noticed to the selected freelancer.
B) Advance payment will not be entertained.
C) Budget extension will not be entertained