Microcontroller Design
Budget: €30 – €250 EUR
Require a custom microcontroller pcb to be designed, using an ESP32 as the microcontroller.
Requirements:
Powered by a standalone battery (E.g 9-12V @1-2A)
Connect to internet through a fibre optic cable (Integrate a separate media converter - to convert fibre to ethernet and use the ethernet pins to connect to the ESP32)
Connect to a Temperature/Humidity sensor, Reed Switch, and Shock Sensor (Basic GPIO inputs with 3V power)
Be capable of sending/making http or https requests via Internet
There are certain dimensions for the PCB that the design should be confined to also. Looking to get this PCB designed, then ordered and tested before issuing final payment as I will need to verify the designed board works of course.
Requirements:
Powered by a standalone battery (E.g 9-12V @1-2A)
Connect to internet through a fibre optic cable (Integrate a separate media converter - to convert fibre to ethernet and use the ethernet pins to connect to the ESP32)
Connect to a Temperature/Humidity sensor, Reed Switch, and Shock Sensor (Basic GPIO inputs with 3V power)
Be capable of sending/making http or https requests via Internet
There are certain dimensions for the PCB that the design should be confined to also. Looking to get this PCB designed, then ordered and tested before issuing final payment as I will need to verify the designed board works of course.