Jetson NANO Carrier board
Budget: $750 – $1,500 USD
Using the official NVIDIA Jetson NANO carrier board as a starting point, design a custom carrier board that can be turn key SMT manufactured with the following modifications:
1. 8-24V DC-input capability
2. Removal of two of the USB 3.0 horizontal board mounted ports replacing with two board mounted vertical USB 3.0 ports
3. Rewire M.2 E-Key to M.2 M-Key (relocating to rear of the PCB)
3. Adding a push-pull nano sim port wired to M.2 M key
4. Removing HDMI and display port connector
5. Adding 3rd CSI port (identical functionality of CSI-0,CSI-1)
6. Adding MCP2515 (wired to GPIO SPI pins) and TJA1050 wired to a RJ45 connector (pinout to be provided) with a provision for a terminating resistor via a jumper
7. RTC coin battery holder wired to existing RTC battery pins (rear of the board)
8. CSI-0 to remain standard CSI connector, CSI-1 and CSI-2 (per point #5) should have the CSI pins wired to edge mounted HDMI connectors (full size, per the following https://www.uctronics.com/camera-modules/camera-accessories/arducam-csi-to-hdmi-cable-extension-module-with-15pin-80mm-fpc-cable-for-raspberry-pi-camera-specific-pack-of-2.html)
1. 8-24V DC-input capability
2. Removal of two of the USB 3.0 horizontal board mounted ports replacing with two board mounted vertical USB 3.0 ports
3. Rewire M.2 E-Key to M.2 M-Key (relocating to rear of the PCB)
3. Adding a push-pull nano sim port wired to M.2 M key
4. Removing HDMI and display port connector
5. Adding 3rd CSI port (identical functionality of CSI-0,CSI-1)
6. Adding MCP2515 (wired to GPIO SPI pins) and TJA1050 wired to a RJ45 connector (pinout to be provided) with a provision for a terminating resistor via a jumper
7. RTC coin battery holder wired to existing RTC battery pins (rear of the board)
8. CSI-0 to remain standard CSI connector, CSI-1 and CSI-2 (per point #5) should have the CSI pins wired to edge mounted HDMI connectors (full size, per the following https://www.uctronics.com/camera-modules/camera-accessories/arducam-csi-to-hdmi-cable-extension-module-with-15pin-80mm-fpc-cable-for-raspberry-pi-camera-specific-pack-of-2.html)